Precautions For Catalytic Converter - Hyundai Tiburon 2003 Workshop Manual

Hide thumbs Also See for Tiburon 2003:
Table of Contents

Advertisement

12. To avoid overloading the wiring, take the electrical current load of the optional equipment into consideration, and determine the
appropriate wire size.
Nominal
size
0.3mm²
0.5mm²
0.85mm²
1.25mm²
2.0mm²
3.0mm²
5.0mm²

PRECAUTIONS FOR CATALYTIC CONVERTER

If a large amount of unburned gasoline flows into the converter, it may overheat and create a fire hazard. To prevent this
observe the following precations and explain them to your customer.
1. Use only unleaded gasoline.
2. Do not run the engine while the car is at rest for a long time. Avoid running the engine at fast idle for more than 10minutes and idle
speed for more than 20 minutes.
3. Avoid start-jump tests. Do start-jumps only when absolutely necessary. Perform this test as rapidly as possible and, while testing,
never race the engine.
4. Do not measure engine compression for an extended time. Engine compression tests must be made as rapidly as possible.
5. Avoid coasting with the ignition turned off and during prolonged braking.
6. Do not dispose of used catalytic converter with parts contaminated by gasoline or oil.
BODY DIMENSION
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
SAE gauge No.
In engine compartment
AWG 22
AWG 20
AWG 18
AWG 16
AWG 14
AWG 12
AWG 10
Permissible current
Other areas
-
7A
9A
12A
16A
21A
31A
Page 19 of 20
5A
13A
17A
22A
30A
40A
54A
24.04.2008

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents