Automatic Transaxle System Inspection Process For Trouble Symptoms - Hyundai Tiburon 2003 Workshop Manual

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Automatic Transaxle System > Automatic Transaxle System >
Troubleshooting (F4A42-2), TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Automatic Transaxle System > Automatic
Transaxle System > Troubleshooting (F4A42-2)
INSPECTION PROCESS FOR TROUBLE SYMPTOMS
INSPECTION PROCEDURE 1
Communication with the scan tool
If communication with the scan tool is not possible, the
cause may be a defective diagnostic trouble line or the TCM
is not functioning.
INSPECTION PROCEDURE 2
Starting impossible
Starting is not possible when the selector lever is in P or N
range. In such cases, the cause may be a defective engine
system, torque converter or oil pump.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Possible cause
• Malfunction of diagnostic trouble line
• Malfunction of connector
• Malfunction of the TCM
Possible cause
• Malfunction of the engine system
• Malfunction of the torque converter
• Malfunction of the oil pump
Page 1 of 8
24.04.2008