Page 6 of 6
CHARGING SYSTEM TEST RESULTS
RESULT ON PRINTER
REMEDY
Charging system normal/Diode
Charging system is normal
ripple normal
Generator does not supply charging current to battery
No charging voltage
→ Check belts, connection between generator and battery
Replace belts or cable or generator as necessary
Generator does not supply charging current to battery and electrical load to
Low charging voltage
system fully
→ Check belts and generator and replace as necessary
The voltage from generator to battery is higher than normal limit during
High charging voltage
voltage regulating.
→ Check connection and ground and replace regulator as necessary
One or more diodes in the generator is not functioning properly
Excess ripple detected
→ Check generator mounting and belts and replace as necessary
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
24.04.2008