Hyundai Tiburon 2003 Workshop Manual page 661

A. Turn the ignition switch to ON, and wait for at least 30 seconds.
B. Clear the malfunction code stored in the memory with the Hi-Scan Pro.
C. Turn the ignition switch to LOCK, and wait for 30 seconds.
D. Turn the ignition switch to ON, and wait for 30 seconds.
E. Using Hi-Scan Pro, check the DTC.
There is no DTC.
[HINT]
Codes other than these may be output at this time, but they are not relevant to this procedure.
CIRCUIT INSPECTION
DTC
CIRCUIT DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
1. Preparation
(1) Disconnect the negative (-) terminal cable from the battery, and wait at least 30 seconds.
(2) Remove the DAB module.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
B1400
B1403
B1409
B1410
Page 27 of 34
Satellite left side
defect
Satellite right side
defect
Satellite left
communication
error
Satellite right
communication
error
24.04.2008