6. Unbolt the tensioner to remove the timing belt.
If you plan to use the timing belt again, mark the rotation direction on the belt so you reinstall it correctly.
INSTALLATION
1. Install the idler pulley to water pump boss.
Insert and install the idler pulley to the roll pin that is pressed in the water pump boss.
2. Install the tensioner arm and plain washer to the cylinder block.
3. Install the tensioner pulley to the tensioner arm.
4. Install the camshaft sprockets and align the timing marks.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 2 of 5
24.04.2008