Hyundai Tiburon 2003 Workshop Manual page 312

Position the pad with its pad wear indicator upward on the piston side.
3. Insert the piston in the cylinder using the Special Tool (09581-11000).
4. Install the new pads. The shims are attached to the each pad as illustrated.
Be careful so that the disc or pad isn't contaminated by grease.
5. Install the bolt and tighten to the specified value.
Tightening torque
Guide rod bolt: 22~32 Nm (220~320 kgf·cm, 16~24 lbf·ft)
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 2 of 6
24.04.2008