Hyundai Tiburon 2003 Workshop Manual page 150

1. Install the oil pump case with the gasket.
Tightening torque
Oil pump case bolt :
12 ~ 15Nm (120 ~ 150kg.cm, 9 ~ 11lb.ft)
Oil pump cover screw :
8 ~ 12Nm (80 ~ 120kg.cm, 6 ~ 9lb.ft)
2. Install the oil seal into the oil pump case as tightly as possible, using the special tool (09214-33000).
3. Install the relief plunger and spring, and tighten the oil relief valve plug to the specified torque.
Tightening torque
Oil relief valve plug :
40 ~ 50Nm (400 ~ 500kg.cm, 29 ~ 36lb.ft)
4. Install the oil screen and a new gasket.
Tightening torque
Oil screen bolt :
15 ~ 22Nm (150 ~ 220kg.cm, 11 ~ 15lb.ft)
5. Clean the gasket surfaces of the cylinder block and the oil pan.
6. Apply sealant to the groove of the oil pan flange.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 3 of 5
24.04.2008