Hyundai Tiburon 2003 Workshop Manual page 752

6. Loosen the rear bumper lower part mounting screws.
When installing, align the protrusion of the bumper cover with the groove of the panel.
7. Disconnect the licence lamp connector from the rear bumper cover and remove the rear bumper beam
assembly.
Tightening torque:
25~30 Nm (250~300 kg·cm, 18.0~21.6 lb·ft)
8. Installation is the reverse of removal.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 2 of 2
24.04.2008