5. Install the pads.
Be careful so that the disc or pad is contaminated by grease
6. Tighten the brake hose connecting bolt.
Tightening torque
Sliding pin
Carrier mounting bolt
Brake hose mounting oil bolt
1. Check that the surface of the pin and bolts is not damaged before tightening.
2. Bleed the system. Depress the pedal several times and check for fluid leakage from all connecting
parts.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Nm (kgf·cm, lbf·ft)
34~44 (350~450, 26~33)
64~74 (650~750, 48~54)
25~29 (250~300, 18~22)
Page 6 of 6
24.04.2008