Charging System Test Procedure; Starter Test Results - Hyundai Tiburon 2003 Workshop Manual

3. Cranking voltage and starter test results will be displayed on the screen.
Take relevant action according to the test results by referring to the starter test results as given below.
4. To continue charging system test, press ENTER.

STARTER TEST RESULTS

RESULT ON PRINTER
Cranking voltage normal
Cranking voltage low
Charge battery
Replace battery

CHARGING SYSTEM TEST PROCEDURE

1. Press ENTER to begin charging system test.
2. If ENTER button is pressed, the tester displays the actual voltage of alternator.
Press ENTER to test the charging system.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
System shows a normal starter draw
Cranking voltage is lower than normal level
→ Check starter
The state of battery charge is too low to test
→ Charge the battery and retest
→ Replace battery
→ Check wiring for open circuit, battery cable connection, starter and repair
or replace as necessary.
→ If the engine does crank, check fuel system.
REMEDY
Page 4 of 6
24.04.2008