Return Tube And Hose - Hyundai Tiburon 2003 Workshop Manual

Hide thumbs Also See for Tiburon 2003:

Table of Contents

1. Install the pressure hose and tube so that they are not twisted and they do not come in contact with

any other parts.

2. After installation, bleed the system.

RETURN TUBE AND HOSE

1. Detach the hose from the power steering fluid reservoir.

2. Remove the return tube and hose mounting clamps.

3. Raise the vehicle and remove the mounting clamp which is holding both the pressure tube and the return

4. Remove the pressure tube and the return tube fitting in the gear box.

5. Lower the vehicle and disconnect the clamp holding the return tube and hoses.

6. Remove the return tube and hoses.

7. Installation is the reverse of removal.

1. Install the return tube and hoses so that they are not twisted and they do not come in contact with any

other parts.

2. After installation, air bleed the system.

http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...

Show Quick Links

Table of Contents