Hyundai Tiburon 2003 Workshop Manual page 609

3 AMB Ambient
temperature
display
4 A/C A/C ON/OFF
CONTROL
5 MODE MODE DOOR
CONTROL
6 DEF DEF MODE
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
• "AMB":
Display
• Ambient
temperature:
Display
• The other
signals: OFF
• "A":
Display/OFF
• "AUTO":
OFF
• "MODE":
Display/OFF
• VENT
• "AUTO": Off
• B/L
• FOOL
• MIX
• "DEF": ON
• "A/C":
Display
• REC. IND:
OFF
• TEMP DOOR
• MODE DOOR
• INTAKE DOOR
• BLOWER FAN SPEED
• A/C
2. When the AUTO mode is off, the word AUTO should
not appear.
3. After off the AUTO mode, the system is automatically
controlled except for the manually selected SW.
OFF SW AND SYSTEM OPERATION
- OFF: SYSTEM OFF
- FAN UP/DOWN: BLOWER FAN SPEED MANUAL
CONTROL
- MODE: DISCHARGE MODE MANUAL CONTROL
- A/C: A/C ON/OFF MANUAL CONTROL
- FRE.: FRE. MODE MANUAL CONTROL
- REC.: REC. MODE MANUAL CONTROL
- DEF.: DEF. MODE MANUAL CONTROL, A/C ON,
FRE.
1. System is operated as the same before the AMB SW
turned on.
2. When the AMB SW is pushed, the other signals are
not appearedbut the word AMB and the ambient
temperature are displayed for 5 sec., andthen the
display become the same as the AMB SW is not
pushed.
OFF SW AND SYSTEM OPERATION
- AMB: If the AMB SW is pushed once more when the
ambient temperatureis displayed, the ambient
temperature does not appear and the display
becomethe same as the AMB SW is not pushed.
- OTHER SWITCHES: If the other switch is pushed
except for REARDEF and in-car & ambient /AQS,
ambient temperature does not appear and the pushed
switch is displayed.
1. A/C ON/OFF
OFF SW AND SYSTEM OPERATION
- A/C: A/C ON/OFF MANUAL CONTROL
- OFF: SYSTEM OFF
- AUTO: AUTO MODE AUTOMATIC CONTROL
1. Fix the MODE DOOR to one among VENT, B/L,
FLOOR and MIX.
2. MODE SW MANUAL CONTROL ORDER : VENT →
B/L → FLOOR → MIX → VENT → ...
3. At MIX MODE: MIX LOGIC (MIX, FRE., A/C ON)
OFF SW AND SYSTEM OPERATION
- DEF: DEF MODE MANUAL CONTROL
- MODE: VENT, B/L, FLOOR & MIX (repeat the order)
- AUTO: AUTO MODE AUTOMATIC CONTROL
1. MODE DOOR: Fix to "DEF"
2. INTAKE DOOR: Fix to "FRE." (REC. can be selected)
3. A/C: ON
• A/C OUTPUT ON/OFF control: Corresponding to
the detected temperatureby EVAP SENSOR.
Page 2 of 8
24.04.2008