Hyundai Tiburon 2003 Workshop Manual page 644

[CHECK]
A. Turn the ignition switch to ON, and wait at least 30 seconds.
B. Clear the malfunction code stored in memory with the Hi-Scan Pro.
C. Turn the ignition switch to LOCK, and wait at least 30 seconds.
D. Turn the ignition switch to ON, and wait at least 30 seconds.
E. Using the Hi-Scan Pro, check for DTCs.
There is no DTC.
[HINT]
Codes other than these may be output at this time, but they are not relevant to this procedure.
13. Check clock spring circuit.
[PREPARAION]
Disconnect connector between SRSCM and clock spring.
[CHECK]
Measure resistance between the DAB high on the clock spring side of connector between clock spring and DAB and
body ground.
Resistance : ∞
CIRCUIT INSPECTION
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
B1349
B1355
Page 10 of 34
DAB short to
battery
PAB short to
battery
24.04.2008