Hyundai Tiburon 2003 Workshop Manual page 659

CIRCUIT INSPECTION
DTC
CIRCUIT DESCRIPTION
DTC Detecting Condition
• Too high or low resistane between BPT high (+) wiring
harness and BPT low (-) wiring harness of squib.
• BPT malfunction
• SRSCM malfunction
WIRING DIAGRAM
INSPECTION PROCEDURE
1. Preparation
(1) Disconnect the negative (-) terminal cable from the battery, and wait at least 30 seconds.
(2) Remove the DAB module.
(3) Disconnect the connectors of the PAB, left and right side airbags, belt pretensioners and satellite sensors.
(4) Disconnect the SRSCM connector.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
B1361 DBPT Resistance too high (R ≥ 5.4
B1362 DBPT Resistance too low (R ≤ 0.4
PBPT Resistance too high (R ≥ 5.4
B1367
B1368 PBPT Resistance too low (R ≤ 0.4
Trouble Area
• BPT squib
• SRSCM
• Wire harness
Page 25 of 34
)
)
)
)
24.04.2008