Hyundai Tiburon 2003 Workshop Manual page 361

Page 2 of 3
motor pump from burning.
(1) Select hyundai vehicle diagnosis.
(2) Select vehicle name.
(3) Select Anti-Lock Brake system.
(4) Select air bleeding mode.
(5) Press 'YES' to operate motor pump and solenoid valve.
(6) Wait 60 sec. before operating the air bleeding.
(If not, you may damage the motor).
5. Pump the brake pedal several times, and then loosen the bleeder screw until fluid starts to run out without
bubbles. Then close the bleeder screw.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title... 24.04.2008