Hyundai Tiburon 2003 Workshop Manual page 493

4. Remove the bellows clip.
5. Pull the bellows out toward the tie rod.
Check for rust on the rack when the bellows are replaced.
6. Remove the feed tube from the rack housing.
7. While moving the rack slowly, drain the fluid from the rack housing.
8. Unstake the tab washer which fixes the tie rod and rack with a chisel.
9. Remove the tie rod from the rack.
Remove the tie rod from the rack, taking care not to twist the rack.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 4 of 14
24.04.2008