Brake Pedal And Brake Switch Adjustment; Pedal Height; Brake Switch Clearance; Pedal Free Play - Hyundai Tiburon 2003 Workshop Manual

Hide thumbs Also See for Tiburon 2003:

Table of Contents

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Brake System > General Information > Repair procedures,

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Brake System > General Information > Repair procedures

Brake Pedal and Brake Switch Adjustment

1. Disconnect the brake switch connector, loosen the brake switch locknut (A), and back off the brake switch (B)

until it is no longer touching the brake pedal.

2. Lift up the carpet. At the insulator cutout, measure the pedal height (C) from the middle of the left-side center

of the pedal pad (D).

Standard pedal height (with carpet removed):

170 mm (6.69 in.)

3. Loosen the pushrod locknut (A), and screw the pushrod in or out with pliers until the standard pedal height

from the floor is reached. After adjustment, tighten the locknut firmly. Do not adjust the pedal height with the

pushrod depressed.

1. With the engine off, inspect the pedal free play (A) on the pedal pad (B) by pushing the pedal by hand.

http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...

Show Quick Links

Table of Contents