Inspect Ignition Coil - Hyundai Tiburon 2003 Workshop Manual

Hide thumbs Also See for Tiburon 2003:

Table of Contents

7. Resistance should not be higher than 2.6k per meter of cable.

If resistance is higher, replace the cable.

INSPECT IGNITION COIL

1. Measure the primary coil resistance between terminals 1, 2 and 1,3.

Standard value : 0.58 ± 10%

2. Measure the secondary coil resistance between the high-voltage terminal for the No.1 and No.4 cylinders, and between the

high-voltage terminals for the No.2 and No.3 cylinders.

Standard value : 8.8k ± 15%

Be sure, when measuring the resistnace of the secondary coil, to disconnect the connector of the ignition coil.

1. Measurement of the primary coil resistance

Measure the resistance between connector terminals 1 and 2 (the coils at the No.3 and No.6 cylinder sides) fo the ignition

coil, and between terminals 2 and 4 (the coils at the No.2 and No.5 cylinder sides), and between terminals 2 and 3 (the coils

at the No.1 and No. 4 cylinder sides).

2. Measurement of the secondary coil resistance

Measure the resistance between the high-voltage terminal for the No.3 and No.6 cylinders, between the high-voltage

http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...

Show Quick Links

Table of Contents