Hyundai Tiburon 2003 Workshop Manual page 75

Engine coolant inlet fitting attaching bolt
Throttle body to surge tank bolt
Oxygen sensor to exhaust manifold
Front exhaust pipe to exhaust manifold nut
Front exhaust pipe to catalytic converter bolt
Catalytic converter to center exhaust pipe nut
Center exhaust pipe to main muffler nut
Main muffler hanger support bracket bolt
Delivery pipe installation boly
Timing belt tensioner pulley bolt
Timing belt idler pulley bolt
Timing belt tensioner arm fixed bolt
Auto tensioner fixed bolt
Accelerator cable bracket
Spark plug
CHECKING ENGINE OIL
1. Position a vehicle on a level surface.
2. Turn off the engine.
In the case of a vehicle that has not been used for a prolonged period, run the engine for several minutes.
Turn off the engine and wait for 5 minutes at least, then check the oil level.
3. Check that the engine oil level is within the level range indicated on the oil dipstick. If the oil level is found to have fallen to
the lowerlimit (the "L" mark), refill to the "F" mark.
When refilling, use the proper grade of engine oil.
4. Check that the oil is not dirty or mixed with coolant or gasoline, and that it has the proper viscosity.
SELECTION OF ENGINE OIL
Recommended API classification: SH OR ABOVE
Recommended SAE viscosity grades :
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
17 ~ 20
15 ~ 20
40 ~ 50
30 ~ 40
40 ~ 60
30 ~ 40
30 ~ 40
10 ~ 15
10 ~ 15
43 ~ 55
50 ~ 60
35 ~ 55
20 ~ 27
4 ~ 6
20 ~ 30
Page 5 of 12
170 ~ 200 12 ~ 14
150 ~ 200 11 ~ 14
400 ~ 500 29 ~ 36
300 ~ 400 22 ~ 29
400 ~ 600 29 ~ 43
300 ~ 400 22 ~ 29
300 ~ 400 22 ~ 29
100 ~ 150 7 ~ 11
100 ~ 150 7 ~ 11
430 ~ 550 31 ~ 40
500 ~ 600 36 ~ 43
350 ~ 550 25 ~ 40
200 ~ 270 14 ~ 20
40 ~ 60 3 ~ 4
200 ~ 300 14 ~ 22
24.04.2008