Clutch Release Cylinder Removal/Installation; Clutch Release Cylinder Inspection; Clutch Release Cylinder Disassembly - Hyundai Tiburon 2003 Workshop Manual

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Clutch System > Clutch System > Clutch Release Cylinder >
Repair procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Clutch System > Clutch System > Clutch
Release Cylinder > Repair procedures
REMOVAL
1. Disconnect the clutch tube.
2. Remove the clutch release cylinder mounting bolt.
INSTALLATION
1. Coat the clevis pin with the specified grease.
CASMOLY L9508
2. Install the clutch release cylinder, and the clutch tube.
INSPECTION
1. Check the clutch release cylinder for fluid leakage.
2. Check the clutch release cylinder boots for damage.
DISASSEMBLY
1. Remove the clutch hose, valve plate, spring, push rod and boot.
2. Remove any dirt from the piston bore opening of the release cylinder.
3. Remove the piston from the release cylinder using compressed air.
1. Cover the release cylinder with rags to prevent the piston from popping out and causing injury.
2. Apply compressed air slowly to prevent the fluid from splashing in your eyes or on your skin.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 1 of 2
24.04.2008