Hyundai Tiburon 2003 Workshop Manual page 674

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Restraint > Airbag Module > Repair procedures, TIBURON
(GK) > 2003 > G 2.7 V6 DOHC > Restraint > Airbag Module > Repair procedures
REMOVAL
1. Disconnect the negative battery cable and keep secure from battery.
Wait at least 30 seconds after disconnecting the battery cable before doing any further work.
2. Remove the side protect cover of steering wheel and airbag module mounting bolts using a hexagonal
wrench.
3. When disconnecting the connector of the clock spring from the airbag module, pull the airbag's lock toward
the outer side to spread it open.
When disconnecting the airbag module-clock spring connector, take care not to apply excessive force to
it.
4. Remove the drive airbag module.
The removed airbag module should be stored in a clean, dry place with the pad cover face up.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 1 of 4
24.04.2008