Hyundai Tiburon 2003 Workshop Manual page 512

Page 4 of 8
When assembling, use a new gasket and O-ring.
8. Mount the pulley in a vise and remove the pulley nut and the spring washer.
9. Pull the pulley out.
10. After removing the snap ring of the shaft with snap ring pliers, remove the dust spacer.
11. Tap the rotor side of the shaft slighty with a plastic hammer to remove the shaft.
12. Remove the oil seal from the oil pump body.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title... 24.04.2008