Oil Pump Pressure Test - Hyundai Tiburon 2003 Workshop Manual

Hide thumbs Also See for Tiburon 2003:

Table of Contents

OIL PUMP PRESSURE TEST

1. Disconnect the pressure hose from the pump. Connect the special tool between the pump and the pressure

hose as illustrated.

2. Bleed the air, and then start the engine and turn the steering wheel several times so that the fluid temperature

can rise to approximately 50~60°C (122~132° F) opera ting temperature.

3. Increase the engine speed to 1,000 ± 100 rpm.

4. Close the shut-off valve of the special tool and measure the fluid pressure to confirm that it is within the

standard value range.

Standard value

Relief pressure :

8.3~8.8 MPa (85~90 kg.cm², 1209~1280 psi)

Do not keep the shut-off valve on the pressure gauge closed for more than ten seconds.

5. Remove the special tools, and tighten the pressure hose to the specified torque.

http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...

Show Quick Links

Table of Contents