Hyundai Tiburon 2003 Workshop Manual page 759

Page 2 of 4
8. Before connecting connectors, make sure the terminals (A) are in place and not bent.
9. Check for loose retainer (A) and rubber seals (B).
10. The backs of some connectors are packed with grease. Add grease if necessary. If the grease is
contaminated, replace it.
11. Insert the connector all the way and make sure it is securely locked.
12. Position wires so that the open end of the cover faces down.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title... 24.04.2008