Table of Contents
Advertisement
INSPECTION PROCEDURE
1. Preparation
(1) Disconnect the negative (-) terminal cable from the battery, and wait at least 30 seconds.
(2) Remove the DAB module.
(3) Disconnect the connectors of the PAB, left and right side airbags, belt pretensioners and satellite sensors.
(4) Disconnect the SRSCM connector.
Place the DAB with the front surface facing upward.
2. Check the PAB resistance.
[PREPARATION]
Release the airbag activation prevention mechanism on the SRSCM side of the airbag squib side. Connect the dummy
(0957A-38200) and dummy adapter(0957A-38300) to PAB connector of the SRSCM connector side.
Before checking the resistance, you have to insert the shorting bar insert plastic that is attached to the diagnosis
checkerinto the SRSCM connector.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 21 of 34
24.04.2008
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
