Page 6 of 14
15. When the end of the circlip comes out of the notched hole of the housing rack cylinder, turn the rack stopper
counterclockwise and remove thecirclip.
Be careful not to damage the rack.
16. Remove the rack stopper, rack bushing and rack from the rack housing.
17. Remove the O-ring from the rack bushing.
18. Remove the oil seal from the rack bushing.
19. Remove the valve body from the valve body housing with a soft hammer.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
24.04.2008