Hyundai Tiburon 2003 Workshop Manual page 301

Page 3 of 3
1. Apply genuine brake fluid to the rubber parts of the cylinder kit and grommets.
2. Carefully insert the springs and pistons in the proper direction.
3. Press against the pistons with a screwdriver and install the retainer ring.
4. With the piston pushed completely by a screwdriver, install the cylinder pin.
5. Mount two grommets.
6. Install the reservoir on the cylinder.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title... 24.04.2008