Hyundai Tiburon 2003 Workshop Manual page 270

Total : 145 ± 6
In the joint : 100 ± 3
In the boot : 45 ± 3
A/T : Automatic Transmission M/T : Manual Transmission
5. Tighten the tripod joint boot bands.
6. Add the specified grease to the birfield joint as much as was wiped away at inspection.
7. Install the boots.
8. Tighten the new birfield joint boot bands.
Keep the specified distance (A) between the bellows when they are clampped with an Oetiker crimping
tool (P/No. : 1094)or a commercially available hand pincers (2.7L).
Specified distance (A) : 1.8 mm (0.071 in.) or less
9. To control the air in the tripod joint boot, keep the specified distance between the boot bands when they are
tightened.
Standard value (A) mm(in.)
2.0L A/T
2.0L 6M/T
2.7L 6M/T
2.7L M/T, A/T
LH : Left Hand side, RH : Right Hand side
A/T : Automatic Transmission
M/T : Manual transmission
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
LH
514 ± 2
(20.24 ± 0.08)
492.6 ± 2
(19.39 ± 0.08)
514.2 ± 2
(19.43 ± 0.08)
515 ± 2
(20.28 ± 0.08)
Page 7 of 8
RH
799.2 ± 2
(31.47 ± 0.08)
803.6 ± 2
(31.64 ± 0.08)
508.7 ± 2
(20.03 ± 0.08)
508.7 ± 2
(20.03 ± 0.08)
24.04.2008