Hyundai Tiburon 2003 Workshop Manual page 741

5. Apply a light coat of glass primer around the tailgate glass.
1. Never touch the surface applied primer with your hands.
If you do, the adhesive may not bond to the glass properly, causing a leak after the tailgate glass has
been installed.
2. Do not apply body primer to the glass.
3. Keep water, dust, and abrasive materials away from the surface applied primer.
6. Apply a sealant around the edge of the glass.
Part
Upper
Side
Lower
Apply the adhesive within 5 minutes after applying the primer to the glass.
7. Apply a light coat of body primer to the original sealant remaining around the window opening flange. The
glass should be installed within 5 minutesafter you apply the primer.
8. Use suction cups or the special tool (09861-31400), lower the glass over the opening, align it with the marks
made in step 3 and set it down onthe sealant.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
A
23.5mm
Page 2 of 3
Remarks
Glass molding sub
24.04.2008