Rear Stabilizer Bar Inspection - Hyundai Tiburon 2003 Workshop Manual

Hide thumbs Also See for Tiburon 2003:

Table of Contents

1. If there is a crack in the dust cover, replace it and add grease.

2. Shake the stabilizer link ball joint stud several times.

3. If the rotating torque is above the upper limit of the standard value, replace the stabilizer link.

4. If the rotating torque is below the lower limit of the standard value, the ball joint may be reused unless it has

drag and excessive play.

http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...

Show Quick Links

Table of Contents

Troubleshooting