Compressor Disassembly - Hyundai Tiburon 2003 Workshop Manual

Hide thumbs Also See for Tiburon 2003:

Table of Contents

1. Remove the center bolt(A) while holding the pressure plate with a commercially available pressure plate bolt

remover(B); Special tool number 09977-2900.

2. Remove the pressure plate(A) and shim(B), taking care not to lose the shims. If the clutch needs adjustment,

increase or decrease the number and thickness of shims as necessary, then reinstall the pressure plate, and

recheck its clearance.

3. If you replacing the field coil, remove snap ring(A) with snap ring pliers.

• Be careful not to damage the pulley(B) and compressor during remove/installation.

• Once snap ring(A) is removed, replace it with a new one.

4. Remove the screw from the field coil ground terminal.

http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...

Show Quick Links

Table of Contents

Troubleshooting