Hyundai Tiburon 2003 Workshop Manual page 662

(3) Disconnect the connectors of the PAB, left and right side airbags, belt pretensioners and satellite sensors.
(4) Disconnect the SRSCM connector.
Place the DAB with the front surface facing upward.
2. Check satellite circuit (communication error).
[PREPARATION]
Check continuity between the SRSCM connector and the satellite connector as high (+) and high, low (-) and low (-).
OK : Continuity
3. Check the satellite sensor (defect).
[PREPARATION]
A. Turn the ignition switch to LOCK.
B. Disconnect the negative (-) terminal cable from the battery, and wait for 30 seconds.
C. Connect the satellite connector.
D. Connect the negative (-) terminal cable to the battery, and wait for 30 seconds.
[CHECK]
A. Turn the ignition switch to ON, and wait for at least 30 seconds.
B. Clear the malfunction code stored in the memory of the Hi-Scan Pro.
C. Turn the ignition switch to LOCK, and wait for 30 seconds.
D. Turn the ignition switch to ON, and wait for 30 seconds.
E. Using the Hi-Scan Pro, check DTC.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 28 of 34
24.04.2008