Mazda RX-8 Workshop Manual page 2134

2 Is stall speed normal?
(See MECHANICAL SYSTEM TEST
[SJ6A-EL].)
3 Inspect the TFT sensor and related
wiring harness: vibration,
intermittent open/short circuit
(See TRANSMISSION FLUID
TEMPERATURE (TFT) SENSOR
INSPECTION
Is it normal?
4 Inspect the line pressure control
solenoid.
(See SOLENOID VALVE
INSPECTION
Is it normal?
5 Inspect for bending, damage,
corrosion or kinks of the oil cooler
pipes.
Are oil cooler pipes normal?
6 Verify test results.
[SJ6A-EL].)
[SJ6A-EL].)
If normal, return to the diagnostic index to service any additional
symptoms.
If malfunction remains, inspect the related Service Bulletins and/or
On-line Repair Information and perform repair or diagnosis.
If the vehicle is repaired, troubleshooting
completed.
If the vehicle is not repaired or additional diagnostic
information is not available, replace the TCM.
YesGo to the next step.
No Repair or replace any malfunctioning parts
according to the inspection results.
YesGo to the next step.
No Repair or replace part if necessary.
YesGo to the next step.
No Overhaul the transmission and repair or
replace any malfunctioning parts. (clutch
slippage, worn)
(See Automatic Transmission Workshop
Manual SJ6A-EL.)
YesInspect the coupler component.
If normal, replace the malfunctioning parts.
(See Automatic Transmission Workshop
Manual SJ6A-EL.)
No Replace any malfunctioning parts.