Local Area Network (Lan) Ethernet And Wireless Lan - SATO CG2 Series Operator's Manual

Section 7: Interface Specifications

7.4 LOCAL AREA NETWORK (LAN) ETHERNET AND WIRELESS LAN

7.4.1 Basic Specifications of LAN
A Local Area Network (LAN) interface requires a driver shipped with each printer that has the interface
installed. The driver must be loaded on the host computer and configured to run one of the supported network
protocols using a 10/100BaseT LAN connection. Details for loading the LAN driver are contained in the LAN
Interface Manual that is shipped with each printer with a LAN Optional interface installed.
LAN interface is available with Type 2 board.
Interface connector
Link/Status LED
Maintenance function
Interface type
Page 7-8
Cable type: For 10BASE-T and 100BASE-TX
Cable length: 100m or less
Status LED lights up when establishing the LINK with Ethernet equipment. The
LINK is established by Auto Negotiation.
LED
LINK
SPEED
[Printing LAN configuration information]
LAN configuration information will be printed on the third sheet of user test print
and factory test print.
[Initializing LAN configuration information]
LAN configuration information will be initialized through [All Clear] of Factory
Clear Mode. For more details, refer to the authorized SATO servicing personnel.
Use Printer configuration tool or <DI> command.
<DI>a
Parameter
a Interface
Color
Green Lights up when establishing the LINK
Yellow Lights off when recognizing the destination
10BASE-T
Lights up when recognizing the destination
100BASE-TX
Item Value
0
1
2
Conditions
Decription
USB [Default]
LAN
Keypad
CG2 Series Operator Manual