Universal Serial Bus (Usb) Interface - SATO GY412 Operator's Manual

7.4 UNIVERSAL SERIAL BUS (USB) INTERFACE

7.4.1 Basic Specifications
The USB interface of this printer complies with the USB2.0 standard.
7.4.2 Basic Specifications of USB interface
Interface connector
Interface
Version
Communications
LED
Communication
settings
Maximum receive
buffer capacity
GY412 Operator Manual
USB
Series B plug
Standard installation
USB 2.0
(1) Transfer rate: Full speed (12Mbps)
(2) Transfer mode: Bulk / Control mode
(3) Controller: Compatible with UHCI / OHCI
None
The following can be set through the interface mode of the printer.
Protocol: Setting range:
STATUS4 (Protocol for the driver) (*Default value)
STATUS5
2.95 MB
0 MB
Near full occurred
Near full released
Section 7: Interface Specifications
Remaining 0.95 MB
Remaining 1.95 MB
2.95 MB
Page 7-5