Rfid Mode - SATO TG3 Series Operator's Manual

Section 3: Configuration and Operation

3.16 RFID MODE

After installing the RFID module to the printer, you need to activate the RFID module through the printer
configuration.
FUNCTION
button
FUNCTION
button
FUNCTION
button
FUNCTION
button
Return to MAINTENANCE MODE menu
1. When MAINTENANCE MODE is displayed, press
RFID MODE.
2. When RFID MODULE is displayed, press
ton to activate the installed RFID module.
Pressing FEED button repeatedly will switch to the next setting options as shown above. To return to the
previous setting option, press ONLINE button.
3. When the desired setting option is displayed, press arrow buttons to select the item or to set the value and
then press FEED button to save the setting
Page 3-50
Select RFID MODE
+ FEED button
ONLINE button
Select ENABLE +
FEED button
ONLINE button
FEED button
ONLINE button
FEED button
ONLINE button
FEED button
Select DISABLE
+ FEED button
Select module +
FEED button
Displayed only
when ThigMagic
is selected for
module.
/ arrow buttons and then FEED button to enter to
/ arrow buttons to select ENABLE and press the FEED but-
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
TG3 Series Operator Manual