Unpack Realpresence Collaboration Server (Rmx) 1800/2000/4000 - Polycom RealPresence 1800 Getting Started Manual

A E I
PPLIANCE DITION NSTALLATION
U R P C
NPACK EAL RESENCE OLLABORATION
Unpack RealPresence Collaboration Server
(RMX) 1800/2000/4000
18
S (RMX) 1800/2000/4000
ERVER
• Use a regulating uninterruptable power supply (UPS) to protect the Real-
Presence Collaboration Server from power surges and voltage spikes, to
keep your MCU operating in case of a power failure.The RealPresence
Collaboration Server 4000 requires either two DC or three AC power
supply cables, each connected to a power supply.
• Place the RealPresence Collaboration Server on a hard, flat surface such as
a desktop or mount it on 19" rack.
The RealPresence Collaboration Server 4000 can also be mounted on a 23"
rack.
• The RealPresence Collaboration Server 4000 has a height of 6U. Ensure
this space is available on the rack.
• The airflow of the RealPresence Collaboration Server 1800 is from front to
back. Be sure that the areas in the front and rear side of the system are clear
for proper ventilation.
The airflow of the RealPresence Collaboration Server 2000/4000 is from
right to left. Be sure that the areas in the right and left side of the system
are clear for proper ventilation.
Breaking the seal voids the warranty
The RealPresence Collaboration Server 1800 is a sealed system, breaking the seal
and opening the chassis voids the warranty.
Perform the following procedures when unpacking the RealPresence Collabo-
ration Server (RMX) 1800/2000/4000.
T
ASK
1. To unpack and lift the RealPresence Collaboration Server (RMX)
1800/2000/4000:
2. When you receive the RealPresence Collaboration Server (RMX)
1800/2000/4000 packing case, inspect the equipment for damage and
verify that the components match the packing slip.
P R
OLYCOM
P R P C
OLYCOM EAL RESENCE OLLABORATION
P C
EAL RESENCE OLLABORATION
S G S
ERVER ETTING TARTED
S .8.6
ERVER V
G
UIDE