Setting A Network Service As Default - Polycom 1500 Administrator's Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide
14 Define the Primary and Alternate SIP Server for this network Service.
• Starting with Version 7.1, Registration of conferencing entities with the SIP Servers was moved
to the conferencing entities and is defined in the Conference Profile.
• If Microsoft Office Communications or Lync server are part of this network service, a certificate
must be created for this network service. If each network connected to the Collaboration Server
includes Microsoft Office Communications or Lync server, separate certificates must be created
and sent to the Collaboration Server for each of these networks.
• If the Network Service does not include a DNS, you must use the IP address of the SIP Server
instead of its name.
The field definitions of the SIP Servers tab are the same as for the Default IP Network Service. For
more information see
15 Click the Security tab.
The field definitions of the Security tab are the same as for the Default IP Network Service. For more
information see
16 Optional. To configure the ICE environment, click the SIP Advanced tab.
17 Modify the following fields:
Default IP Network Service – SIP Advanced
Field
Server User Name
ICE Environment
18 Click the OK button.
The new Network Service is added to the IP Network Services list pane.

Setting a Network Service as Default

The default Network Service is used when no Network Service is selected for the following:
● Dial out participants
● Reserving resources for participants when starting an ongoing conference
● Gateway calls
In addition, the Signaling Host IP address and the MCU Prefix in GK displayed on the Collaboration Server
Web Client main screen are taken from the default H.323 Network Service.
One IP Network Service can be defined as default for H.323 connections and another Network Service as
default for SIP connections. If the IP Network Service supports both H.323 and SIP connections, you can
set the same Network Service as default for both H.323 and SIP, or for H.323-only or for SIP-only.
Polycom®, Inc.
Default IP Network Service – SIP Servers .
Default IP Network Service – Security (SIP Digest) .
Description
Enter the User name for this service as defined in the Active Directory. For
example, enter rmxNet2.
This field is disabled if the ICE Environment field is set to None.
Select MS (for Microsoft ICE implementation) to enable the ICE integration.
This field is disabled if the Collaboration Server is not running in MPM+ Card
Configuration Mode.
537