Default Profile Settings In Cp Conferencing Mode - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
Conferencing Capabilities in the Different Conferencing Modes
Feature
Recording
Site Names
* Entry Queue & Destination Conference must have the same profile (i.e. SVC only to SVC only, Mixed CP and SVC
to Mixed CP and SVC)
** Only Basic Cascading is available
*** For AVC, the LPR error resiliency is used, however for SVC endpoints, new error resiliency methods are used
‡. Content Line Rate is fixed at 128Kbps.

Default Profile Settings in CP Conferencing Mode

The Collaboration Server is shipped with a default Conference Profile for CP conferences which allows
users to immediately start standard ongoing CP conferences. These are also the default settings when
creating a new Profile. The default settings are as follows:
Default CP Only Conference Profile Settings
Setting
Profile Name
Line Rate
Operator Conference
Encryption
Packet Loss Compensation (LPR
and DBA)
Auto Terminate
Auto Redialing
Exclusive Content Mode
Enable FECC
Video Quality
Maximum Resolution
Content Settings
Content Protocol
Presentation Mode
Polycom®, Inc.
CP Only


Value
Factory_Video_Profile
384Kbps
Disabled
Disabled
Enabled for CP Conferences
• After last participant quits - Enabled
• When last participant remains - Disabled
Disabled
Disabled
Enabled
Sharpness
Auto
HiResGraphics (High Res Graphics)
H.264 HD
Disabled
Mixed CP & SVC

AVC recording only

AVC endpoints only
SVC Only

Managed by the endpoint
(not via MCU)
.
57