Disable Snmp; Snmp Community Name; Disable Telnet Setup; Disable Tftp Firmware Update - Lantronix UDS1100 User Manual

Disable SNMP

This setting allows you to disable the SNMP protocol on the unit for security reasons.
The default setting is N (No).
Disable SNMP (N) ? _

SNMP Community Name

The SNMP Community Name is a required field for NMS to read or write to a device.
Enter a string of 1 to 13 characters. The default setting is public.
SNMP Community Name (public): _
The default entry is public. The current value is displayed in parentheses.

Disable Telnet Setup

Note: If you choose to disable this option, keep in mind that disabling both
Telnet Setup and Port 77FE will prevent users from accessing the setup
menu from the network.
This setting defaults to the N (No) option. The Y (Yes) option disables access to
Setup Mode by Telnet (port 9999). It only allows access locally using the web pages
and the serial port of the unit.
Disable Telnet Setup (N) ? _

Disable TFTP Firmware Update

This setting defaults to the N (No) option. The Y (Yes) option disables the use of
TFTP to perform network firmware upgrades. With this option, you can download
firmware upgrades over the serial port using DeviceInstaller's Recover Firmware
procedure. (See
Disable TFTP Firmware Update (N) : _
UDS1100 User Guide

Figure 8-2. Security Settings

9: Firmware Upgrades.)
8: Setup Mode: Advanced Settings
58