Ip Authorized Manager - Supermicro SSE-G24-TG4 User Manual

Layer 2/3 1/10 Gigabit Ethernet Switches User's Manual

IP Authorized Manager

Clicking the IP A
(Figure 5-15), which allows you to configure allowed management nodes for managing
the switch. The parameters for this page are shown in
Table 5-7. IP Authorized Manager Page Parameters
Parameter
IP Address
Subnet Mask
Port List (Incoming)
VLANs Allowed
Services Allowed
Figure 5-15. IP Authorized Manager Page
M tab brings up the IP A
UTH ANAGER
Description
This parameter specifies the IP address of the manager. An address 0.0.0.0
indicates "Any Manager".
This parameter specifies the sub-network mask for the specified IP address.
This lists the port through which the manager can access this switch. Ports can
be comma separated or provided as a range (for example 1,2,3 or 1-3 or 1,2-3).
This parameter specifies the VLANs through which the manager can access this
switch. VLANs can be comma seperated or provided as range (for example 1,2,3
or 1-3 or 1,2-3).
These control buttons are used to indicate the service type, and can be one or
more of the following: T
UTHORIZED
Table
, SSH, HTTP, HTTPS, SNMP or ALL.
ELNET
5-18
M page
ANAGER
5-7.