Drive Components Failure - Oki B6100 Technical Manual

Step
1
INITIAL ANALYSIS
Inspect the following components.
• Motor Assy Main (PL8.1.14)
• Gear Assy Drive (PL8.1.13)
• Feeder Assy (PL3.1.19)
• Roll Assy Turn (PL3.1.1)
• Roll Assy MBF (PL4.1.2)
• P/H Assy (PL5.1.4)
• BTR Chute Assy (PL6.1.1)
• Fuser Assy (PL6.1.7)
• Roll Assy Mid-1 (PL7.1.7)
• Roll Assy Mid-2 (PL7.1.11)
• Roll Pinch (PL7.1.12)
• Roll Pinch Exit (PL7.1.9)
• PWBA HKB PS (PL10.1.17)
• PWBA HKB26 MCU (PL10.1.13)
Are they compatible with your printer version, correctly
installed, not damaged, deformed, or contaminated?
2
GEAR ASSY DRIVE (PL8.1.13) and MOTOR ASSY MAIN
(PL8.1.14) ANALYSIS
Remove the CRU.
Remove the Fuser Assy (RRP9.1.1).
Cheat the Switch Assy I/L Front.
Use MAIN MOTOR TEST to check the rotation of Gear Assy
Drive.
Do the Motor Assy Main and all of the Gear Assy Drive
rotate smoothly?
3
MOTOR ASSY MAIN (PL8.1.14) ANALYSIS
Remove the Motor Assy Main remaining the connection of har-
ness assy.
Use MAIN MOTOR TEST to check the rotation of Gear Assy
Drive.
Do the Motor Assy Main rotate smoothly?
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Actions and Questions
Secondary FIPs

6.11 Drive Components Failure

Yes
Go to step 2
Go to step 5
Go to step 4
No
Replace the
problem com-
ponents
Go to step 3
Replace the
Motor Assy
Main
(RRP8.1.7)
6-17