Oki B6100 Technical Manual page 241

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Spring MBF (RRP 4.1.9).
5. Remove the Gear Pick Up (RRP 4.1.10).
6. Remove the Roll Assy MBF (with3-6,28)(RRP 4.1.2).
7. Disengaging two hooks that secure the Tray Bottom Assy to the Chute MBF Assy (PL4.1.1),
open the Tray Bottom Assy toward the front.
8. Remove the Tray Bottom Pick Up (RRP 4.1.12).
9. Disengaging two hooks that secure the Actuator N/P MBF to the back of Tray Bottom
(PL4.1.11), remove the Actuator N/P MBF from the Chute MBF Assy .
Replacement
1. Aligning the position exactly, mount the Actuator N/P MBF on the back of Tray Bottom
(PL4.1.11) in the Chute MBF Assy (PL4.1.1.)
2. Secure the shaft of Actuator N/P MBF to two hooks on the back of Tray Bottom .
3. Mount the Tray Bottom Pick Up (RRP 4.1.12).
4. Insert the Spring Tray Bottom MBF (PL4.1.13) into two studs of Tray Bottom Pick Up from the
Chute MBF Assy .
5. Deflecting the right hook of Chute MBF Assy , rotate the Tray Bottom Assy together with the
Tray Bottom Pick Up toward the rear.
6. Insert two shafts of Chute MBF Assy into two stud holes of Tray Bottom Pick Up to secure
the Tray Bottom Assy with left and right hooks of Chute MBF Assy .
7. Mount the Roll Assy MBF (with3-6,28)(RRP 4.1.2).
8. Mount the Gear Pick Up (RRP 4.1.10).
9. Mount the Spring MBF (RRP 4.1.9).
10. Mount the Chute MBF Assy (RRP 4.1.1).
11. Mount the Cover Front L/H (RRP 1.1.10).
12. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 4.1.5 Actuator N/P MBF(PL4.1.12) continued
Removal and Replacement Procedures (RRPs)
10-87