Oki B6100 Technical Manual page 24

Primary FIPs:Error Codes
OKI B6100 Error Codes continued
Code
--
Message
E5
The Cover Assy Front and/or the Cover Rear are/
is open.
--
CLOSE TOP /
REAR
COVER
E5
The Cover Assy Rear Face Up is open.
--
FACE UP TRY
OPEN
E4
There is a paper jam for the standard cut paper at
the Sensor Exit.
--
1. The Sensor Photo:Exit does not turn OFF
E4-2:EXIT
JAM
within the specified time after the Sensor Photo:
Exit turning ON.
2. The Sensor Photo:Exit turns ON immediately
after the power is turned on or when the Cover
Assy Front is close.
E4
There is a paper jam at the Sensor Exit.
--
The paper of Universal or Custom does not actu-
ate the Sensor Photo:Exit within the specified time
E4-3:EXIT
JAM
from the Sensor Photo Regi OFF timing.
E3
There is a paper jam between the Sensor
Photo:Regi and the Sensor Exit in the Fuser Assy.
--
The paper does not actuate the Sensor Exit of the
E3-1:REG
JAM
Fuser Assy within the specified time after the Sen-
sor Photo:Regi activated.
E3
There is a paper jam at the Regi position.
--
The Sensor Photo:Regi turns ON immediately
after the power is turned ON or when the Cover
E3-2:REG
JAM
Assy Front is close.
3-4
Cause
OKI B6100 Laser Printer - Base Engine Technical Manual
Results
-------------
How to Clear the Code
(If you cannot clear the code, go to the
appropriate error code FIP, or to the
option service manual)
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Close the open cover.
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Close the open cover.
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Open the Cover Assy Front or Rear.
Remove the jammed paper.
Close the Cover Assy Front or Rear.
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Open the Cover Assy Front or Rear.
Remove the jammed paper.
Close the Cover Assy Front or Rear.
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Open the Cover Assy Front.
Remove the jammed paper.
Close the Cover Assy Front.
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Open the Cover Assy Front.
Remove the jammed paper.
Close the Cover Assy Front.
Version 1.0