E2-0:Early Feed Jam - Oki B6100 Technical Manual

There is a paper jam at the Sensor Photo:Regi.
Step
1
Inspect the following components.
• Chute CST(PL5.1.27)
• Chute Bottom Lower (PL5.1.26)
• Sensor Photo:Regi (PL5.1.12)
• Actuator Regi (PL5.1.10)
• Spring Sensor Regi (PL5.1.11)
• Clutch Regi (PL5.1.19)
• Roll Regi Metal (PL5.1.5)
• Roll Regi Rubber (PL5.1.7)
• Roll Assy (PL2.2.8) of the Cassette Sub-Assy (PL2.2.1)
• Option Feeder Assy (PL11.1.1)
• Gear Assy Drive (PL8.1.13)
• PWBA Conn (PL10.1.11)
• PWBA HKB26 MCU (PL10.1.13)
• PWBA HKB PS (PL10.1.17)
• Harness Assy Regi (J43-J431, J423) (PL5.1.28)
• Harness Assy Conn (J23-J231) (PL10.1.10)
Are they compatible with your printer version, correctly
installed, not damaged, deformed, or contaminated?
2
Is a piece of paper or foreign object actuating the Sensor
Photo:Regi (PL5.1.12)?
3
ROLL ASSY (PL2.2.8) and the CLUTCH ASSY FRICTION
(PL2.2.7) of the CASSETTE SUB-ASSY (PL2.2.1) ANALY-
SIS
1. Remove the CRU (PL8.1.1).
2. Actuate the Switch Assy I/L Front (PL10.1.12).
3. Observe the paper feed from the Feeder Assy using MAIN
MOTOR TEST.
Is only one sheet of paper fed from the Feeder Assy?
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
The paper arrives at the Sensor Photo:Regi too early.
Actions and Questions
Primary FIPs:Error Codes

3.11 E2-0:EARLY FEED JAM

Yes
Go to step 2. Replace the
problem com-
ponent.
Remove the Go to step 3.
piece of paper
or foreign
object.
Go to step 4. Replace the
Roll Assy
(PL2.2.8) and
the Clutch
Assy Friction
(PL2.2.7).
No
3-25