Oki B6100 Technical Manual page 313

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy Rear (RRP 1.2.3).
4. Remove the Cover Assy Top (RRP 1.1.4).
5. Unplug the connector (P/J212) from the ROS Assy .
6. Unplug the connector (P/J213) from the ROS Assy .
7. Unplug the connector (P/J223) from the ROS Assy .
8. Remove the four screws securing the ROS Assy to the printer.
9. Raising the ROS Assy a little, unplug the connector (P/J211) on the back side.
10. Remove the ROS Assy from the printer.
Replacement
1. Plug the connector (P/J211) on the back side of ROS Assy .
2. Plug the connector (P/J223) in the ROS Assy .
3. Plug the connector (P/J213) in the ROS Assy .
4. Plug the connector (P/J212) in the ROS Assy .
5. Align the ROS Assy with it mount position to the printer.
6. Secure the ROSS Assy to the printer with four screws.
7. Mount the Cover Assy Top (RRP 1.1.4).
8. Mount the Cover Assy Rear (RRP 1.2.3).
9. Mount the Cover Front L/H (RRP 1.1.10).
10. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 8.1.2 ROS Assy (PL8.1.9) continued
10-159