Names Of Components - Oki C834 User Manual

Names of Components

This section explains the names and functions of components of the printer.
No. Name
1 Front cover
2 Front cover open lever
3 Operator panel
4 Power switch
5 Output tray (Top Cover)
6 Multipurpose tray (MP Tray)
7 Tray 1
8 Air vents
9 Wireless LAN module cover
10 Paper supporter
11 Paper set cover
Functions
Front cover of the printer. Pull the front cover open lever to open
the cover.
Lever to unlock when opening the front cover.
This is the panel to operate the printer.
Display screen operation buttons, numeric keys, function keys,
and attention indicator lamp are on the panel.
Turns the machine on and off.
Printouts are stocked here. After opening the front cover, press
the open button inside the printer to pop up.
Various sizes of paper can be loaded.
Load paper.
Outlet/inlet for air.
Please be careful not to block the opening when placing the
printer.
Cover for installation part of the wireless LAN module.
Supports paper.
Holds paper loaded on the Multipurpose tray.
No. Name
12 Open button
13 Toner cartridge, Image drum (K: black)
14 Toner cartridge, Image drum (Y: yellow)
15 Toner cartridge, Image drum (M:
magenta)
16 Toner cartridge, Image drum (C: cyan)
17 Toner cartridge lock lever
18 Fuser unit
19 LED head (four heads)
20 Rear output tray
21 AC power socket
22 Duplex unit * 1
23 Interface part
24 Accessory connector
25 USB interface connection
26 Network interface connection
*1 C824n, C834nw: Option
- 17 -
Functions
Press this button to unlock when opening the output tray (Top
Cover).
A toner cartridge contains toner (powdery ink) for printing.
Image drum electrifies paper and transcribes toner using static
electricity. A drum is combined with a drum cartridge.
Toner cartridges and image drums are consumables.
Fasten a toner cartridge to an image drum.
Add heat and pressure to toner transcribed on paper to bond it.
Expose image drum to light to copy letters and images.
Outlet when paper is output with the printed side up.
Insert the supplied power code.
Component for duplex printing.
Connectors for connecting to a computer can be found.
Port to insert a USB memory.
Insert a USB cable when connecting a computer to the printer
with a USB cable.
Insert a LAN cable when connecting a computer to the printer
via a network.
2. Setup