Maintenance Info - Oki B6100 Technical Manual

1.5.8 Maintenance Info

The Maintenance Info menu displays information that is contained on the MCU PWB. This
information is used to determine if the drum cartridge is nearing end-of-life, feed roll change interval,
machine serial number, and to clear the error log,
Since this information is contained on the MCU PWB, if the MCU PWB is replaced, all information is
lost.
Test
Image Counter
Sheet Counter
Toner Page Count
Serial Number
Reset Error Log
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Table 4. Maintenance Information
Display
0000NNN
0000NNN
0000NNN
XXXXXXXXXX
Start to Confirm
Cancel to abort
Diagnostic Mode
Function
When Select is pressed, the count is
displayed. This test counts the num-
ber of images created. If running
double sided prints, the image
counter will count twice for a single
sheet of paper.
When Select is pressed, the count is
displayed. The internal counter
counts up every FEED signal. The
counter counts up even if the paper
jammed.
When Select is pressed, the count is
displayed. This test counts the num-
ber of toner page prints.
When Select is pressed, the serial is
displayed.
After Select is pressed, you can
press Start to reset (clear) the error
log or press cancel to abort the
selection.
8-13