Paper Size Sensor Failure - Oki B6100 Technical Manual

Secondary FIPs

6.12 Paper Size Sensor Failure

Step
1
INITIAL ANALYSIS
Inspect the following components.
• Cassette Assy (PL2.1.1)
• Switch Size on the PWBA Size 1 (PL9.1.19)
• PWBA MCU PWB (PL10.1.13)
• PWBA HKB PS (PL10.1.17)
Are they compatible with your printer version, correctly
installed, not damaged, deformed, or contaminated?
2
ACTUATOR CST (PL2.1.19) ANALYSIS
Remove the Cassette Assy from the printer.
Press and release each Actuator for CST.
Does each Actuator CST move smoothly?
3
SWITCH SIZE on the PWBA SIZE 1 ANALYSIS
Use SENSOR/SWITCH CHECK to check the Switch Size.
Push and release the Cam SW (PL9.1.15) respectively by
manual and observe the increment of the SENSOR CHECK
counter.
Does the counter increment followed by the push and
release of the Cam SW?
6-20
Actions and Questions
OKI B6100 Laser Printer - Base Engine Technical Manual
Yes No
Go to step 2 Replace the
problem com-
ponents
Go to step 3 Replace the
Cassette Assy
Replace the Replace the
PWBA HKB26 PWBA Size 1
MCU
(RRP10.1.7)
Version 1.0