Oki B6100 Technical Manual page 263

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Shaft 14 (RRP 5.1.10).
5. Remove the Gear 14 (RRP 5.1.10).
6. Remove the P/H Assy (RRP 5.1.1).
7. Open upward the Chute Upper (PL5.1.6) together with Holder Toner Sensor (PL5.1.2) from the
P/H Assy (PL5.1.4).
8. Disengage the right hook of Spring Sensor Regi (PL5.1.11) from the P/H Assy .
9. Holding the operating lever of Actuator Regi , move it to the left to remove the right shaft
of Actuator Regi toward the upper right from the P/H Assy .
10. Remove the Spring Sensor Regi inserted in the shaft of Actuator Regi .
Replacement
1. Insert the Spring Sensor Regi (PL5.1.11) into the right shaft of Actuator Regi .
2. Holding the operating lever of Actuator Regi , insert the left shaft into the left hole in
the P/H Assy (PL5.1.4).
3. Holding the operating lever of Actuator Regi , push the bracket of P/H Assy with the left
shaft to deflect, and insert the right shaft of Actuator Regi into the right hole in the
P/H Assy .
4. Engage the left hook of Spring Sensor Regi with the back of operating lever of Actuator
Regi , and engage the right hook with the right hole in the P/H Assy .
5. Close downward the Chute Upper (PL5.1.6) together with Holder Toner Sensor (PL5.1.2) from
the P/H Assy .
6. Mount the P/H Assy (RRP 5.1.1).
7. Mount the Gear 14 (RRP 5.1.10).
8. Mount the Shaft 14 (RRP 5.1.10).
9. Mount the Chute MBF Assy (RRP 4.1.1).
10. Mount the Cover Front L/H (RRP 1.1.10).
11. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 5.1.3 Actuator Regi (PL5.1.10) continued
10-109